GIC－4117／HC1．7MV Tandetron上的MeV离子注入系统

利用通用离子公司（ＧＩＣ）的４１１７型１．７ＭＶＴａｎｄｅｔｒｏｎ离子束分析设备进行ＭｅＶ级离子注入。所注入的离子能量范围由５００ｋｅＶ到１０ＭｅＶ，离子的质量在２４０ｕ以下，某些元素的负离子束流强度在１５０μＡ以上。双向机械扫描技术可将离子均匀地注入样片。     

双子表面活性剂(C12-2-12.2Br-1)表面活性与驱油效率研究

用滴体积法测定了几种双子表面活性剂和对应常规单链表面活性剂的表面张力-浓度曲线,确定了各自的临界胶束浓度,筛选出高效驱油用表面活性剂—C12-2-12. 2Br^-1;并在不同条件下对其进行了室内模拟驱油评价实验。表面张力测试表明,双子表面活性剂—C12-2-12. 2Br^-1的临界胶束浓度仅为547mg/L,对应表面张力为30.72mN/m,较对应单链表面活性剂DTAB具有更优的表面活性。驱油实验表明C12-2-12. 2Br^-1的驱油效率与浓度呈同向变化关系,其浓度为500mg/L即可提高采收率6.45%,其效果明显优于常规单链表面活性剂-DTAB;该剂更适合于中、低渗油藏水驱采收率的提高。     

不同粘弹性驱替液下毛管数对驱油效果的影响

通过在微亲水人造岩心上开展的室内驱油物理模拟试验,探讨了毛管数对不同粘弹性聚合物溶液驱油效率及残余油饱和度的影响.同时,在相同毛管数条件下,研究了不同粘弹性聚合物溶液对其驱油效率及残余油饱和度的影响,得到了不同粘弹性条件下毛管数与驱油效率关系的一族曲线;比较系统地研究了不同粘弹性聚合物溶液下毛管数对驱油效率及残余油饱和度的影响规律,即在毛管数相同的条件下,聚合物溶液的粘弹性越高,体系的采收率越高,残余油饱和度越低,说明了聚合物溶液的弹性也是影响其提高采收率、降低残余油饱和度的重要因素.对进一步深入研究聚合物驱油机理和现场作业具有行重要指导意义.     

美国高能激光技术2005年主要进展

高能激光武器技术在2005年取得了重大进展。介绍了机载兆瓦级化学氧碘激光器的关键试验和束控-火控系统的飞行试验。评论和讨论了高功率固体激光器、光纤激光器、超高效率二极管源和中继镜技术的重大进展。     

Comparison of mass transfer efficiency in horizontal rotating packed beds and rotating biological contactors

In this study, the mass transfer efficiencies of a novel horizontal rotating packed (h‐RPB) bed and the conventional disc‐type rotating biological contactor (RBC) were studied at four speeds and seven submergences. Pall rings of two different sizes (25, 38 mm), superintalox saddles and a wiremesh spiral bundle were used as packings in the h‐RPB. Volumetric gas–liquid mass transfer coefficients were determined by unsteady state absorption of atmospheric oxygen in de‐aerated water. Power consumption per unit liquid volume has been found for all geometries tested. The oxygen transfer efficiency values for the h‐RPB were found to be 2–5 kg kWh^?1 and for the disc RBC were found to be 1–2 kg kWh^?1. The performance of the h‐RPB was also compared with other gas–liquid contactors such as surface aerators. The study proves that the h‐RPB is a energy efficient alternative to conventional contactors. Copyright © 2005 Society of Chemical Industry     

OCS表面活性剂工业品的界面活性及驱油效率

针对现有三元复合驱油体系化学剂费用投入大,经济效益差的缺点,利用廉价的大庆减压渣油为原料合成了驱油用表面活性剂OCS.测试结果表明,OCS表面活性剂工业品具有优异的降低原油-地层水界面张力的能力,能在较宽的碱浓度和表面活性剂浓度范围内使不同大庆采油厂原油的油-水界面张力降至10^-3mN/m.在无碱条件下,对于大港油田枣园1256断块原油,当OCS活性剂质量分数达到0.2%时,油-水界面张力即可降至10^-3mN/m.大庆原油的平面模型驱油试验表明,OCS表面活性剂、碱和聚合物三元复合体系（ASP）的驱油效率比水驱提高20%以上.     

镁法海绵钛生产工艺中大型无隔板镁电解槽的节能实践

以镁法海绵钛生产工艺中大型无隔板镁电解槽的实际节能情况为例，探讨了在镁电解生产中的非生产耗电、生产耗电、漏电等因素造成的能量浪费，阐述了生产中粗镁直流电耗、电流效率、工作电压3者之间的关系，指出了影响电解槽工作电压的有关因素及降低电解槽工作电压的途径。     

LASER ENHANCED ELECTROCHEMICAL MACHINING PROCESS

An experimental apparatus was designed and built for the hybrid process of laser enhanced electrochemical machining (ECM). Comparison experiments had been done between solely ECM and laser enhanced ECM. The machining performance of hybrid process was investigated and compared with solely ECM. The principle of the hybrid process was exposed by analyzing the microstructure of machining surface. The results show that the hybrid process has advantages in machining accuracy, surface quality, and machining efficiency.     

调幅系数为任意值的调幅波研究

本文讨论了调幅系数为任意值的调幅波，给出了它的表达式，频谱与调幅系数，调制效率和信噪比增益的计算公式。     

烧结机蒸汽系统新老余热管网并网改造

针对烧结机新老蒸汽系统各自独立，使用效率低，不能充分发挥效能的状态，提出了蒸汽系统新老余热管网并网改造，经过一年多的运行，取得了显著的效果。